Posts tagged "green diy energy review"

The Future: Solar Panel Information

Introduction – Mentioned below in the article are just a handful of the ways you can make use of the sun’s energy to power your appliances and other items. This article will explain just how it’s possible to generate solar power electricity, as well as teach you more about solar panel information.

Okay, you’re possibly here because you, like thousands of others like you want to explore the wonderful world of green energy. You by now are aware of the many damaging aspects of using electricity supplied by the power company; the electricity is an infiltrator of the earth’s environment and the yearly electricity bills are gradually increasing.

As the clock is ticking, you are utilizing solar energy as its common to find a solar powered quartz watch on the wrists of many people. However, the energy which the sun releases contains a mixture of light and heat. These energies are important but they cannot directly be used to power a car up. Therefore if you want to attain more useful energy, via the sun, solar panels must be used. But what is a solar panel exactly? Below you can find solar panel information that will give you a accurate view of just what a solar panel is.

But that’s not all; solar power cannot only be used for cars and wrist watches. Technology has evolved so greatly over the past decade that now the sun’s energy can be used efficiently to generate enough electricity to power an entire household!

A solar panel is made up of thousands of solar cells, covered with a protective glass sheet. They are of a dark shade of blue or black. These cells output power through absorbing sunlight. Sometimes, these cells are called photovoltaic cells. A single cell is made from pure silicon which generates only a few volts of electricity and then the entire panel combines the energy to create greater voltage. Solar panels have many uses, such as generating electricity ,heat, and heating water in homes.

Making a switch from non-renewable energy sources to renewable energy sources such as solar power electricity. Fossil fuels such as these will get wiped out within a very short period of time and we must make every effort to cut off our reliance on these and begin using the plentiful solar energy available to us. Instead of paying money to power companies, you can now save it and take a nice, long holiday since solar energy is free.

Solar panels do not cost as much as you might think. Well guess what! that is not the case any more since there are guides that you can use to build solar panels all on your own! Hence the GreenDIYenergy guide.

The initial investment for purchasing it is $49 only and in time you will realize the plethora of benefits it has to offer! GreenDIYenergy is a well written guide with many illustrations to help you build a solar panel all on your own. Now you may be thinking how is it possible that I can build something as complex as a solar panel all on my own right? GreenDIYenergy isn’t an average guide. It is a result of hundreds of hours spent on research and development before a product such as this one became reality. The authors of this guide have studied from well known institutions such as MIT and CERN.

GreenDIYenergy makes it very easy for you to build your own solar panels. You can use the guide to learn the process of generating your own electricity in no time. Building your own solar panels requires you to purchase materials which cost under a hundred dollars and then you aren’t far from generating your own electricity! You’re generating your very own solar power electricity. No more having to listen to those bossy technicians who come to set up those already assembled solar panels. An important aspect of using this guide is that it gives you the freedom of choosing when and where you want to install your solar panels.

In addition you can even make the building of your solar panel into a family affair! Go ahead and get your children to help you so that they may also learn how solar panels are built and their importance. It is important for them to know our planet is at risk and every step must be taken to make it a healthier and safer place for human beings.

You can save money and save the earth at the same time. If we are to save the planet, usage ofsolar panels needs to be implemented on a large scale.

In order to live a much more Earth-friendly life, scientists suggest that we switch to solar energy rather than relying on fossil fuels. As well as while consuming solar energy there will be less toxic chemicals and gases being released into the air and destroying the atmosphere, which in return has even greater adverse effects on the climate and environment around the globe.

One vital aspect to remember is that although solar panels may generate solar power electricity during the day time, at night they will not generate electricity. For that you may need a battery storage system that stores energy during the day and then at night it can release it.

Should you be interested in generating solar power electricity, there are a couple of options available to you. Either you can buy an already built solar panel or build it yourself by using a guide such as GreenDIYEnergy. Now I personally would like to propose the second approach as already built solar panels are very expensive (around $3000 to $5000), which is way beyond the reach of an average middle income family. To make things worse, technicians will charge you a hefty fee for installing solar panels!

If I have interested you into building your own solar panel, with the help of greenDIYenergy, I recommend  to read James Owen his review on this  GreenDIYenergy reviewed  page.

DIY solar panels are relatively cheaper in comparison to ready-made solar panels and they offer the added benefit of installing them at any spot of your house.. Additionally you pay about 15% of what you would otherwise pay for already built ones. But the final decision lays in your hands.

Some other advantages of producing your very own solar power electricity include the tax rebates that you may get form the state. Ever since the Green Act bill was passed, many states now offer their citizens tax rebates in order to encourage them to produce their very own solar power. Contact your local authorities to know if you are eligible for rebates of this kind.

Green DIY Energy Review

The Green DIY Energy product is for you if you like a lot of instructional information on video. This Green DIY Energy review will give you all you need to make an informed decision on which home solar energy guide you should get.

I was pleasantly surprised by the quality and the quantity of information found in the Green DIY Energy product.

Once I logged into the members area, I was pleased that the product actually exceeded what I had expected. I am sure that you know what I mean when I say that often a product does not deliver on its promise.

Don't worry if you are not particularly handy, the instructions are easy to follow. The people at

Green DIY Energy claim that it makes a great weekend family project. It is a good way to get the kids involved as well. It is fun to build your own solar panels and the reward is seeing the finished result working as it should.

What Comes With the Green DIY Energy Product?

Here is what you get with this product:

• Solar Panel Systems – you learn how to power your household appliances on home solar energy.

• A complete guide to building your own home solar energy system.

• A DIY Bundle – plans for wiring the solar panels, along with tax credits and rebates plus a lot more.

Over one hour of instructional videos.

Including, how to build a home wind turbine.

One thing that I really liked is the members forum that was quite helpful in answering any questions I had.

This point is something that sold me on this product. Well, I hope that this Green DIY Energy review will help you make a decision on which home energy product you decide to try.

Review on Do It Yourself Green Guides

Plain and simple, before buying the DIY Solar panels guide, I wanted to be sure I wouldn’t get gypped. My main concern was getting ripped off and my second one was ‘What if the solar panels were too hard to make?’

You can save some serious cash if you know how to make solar energy panels.

Finding out if the guides were a scam

I have a summary of the best DIY green guides to make your own solar panels.

I was sure that I went over all the different brands, including, but not limited to Power4Home, and Earth 4 Energy. All of them seemed to have a guarantee. Some were 30 days and some were 60 days. But it’s easy to say one thing and never actually back it up. from your mouth just to make a sale, but I wanted to be sure they the company actually backed up their claim and fully supported the guarantee.} The next thing I did was check out user reviews to see what real people had to say.

I wanted a neutral perspective so I didn’t look at those pages trying to sell me their own product.

After looking at peoples’ reviews, I figured out that most of the sites didn’t honor their guarantee which really turned me away. Those that were unhappy, they eventually got a refund but it took some time.

I finally found the two guides that weren’t cross off my list because they actually provided good customer support.

Are solar panels hard to make?

Without any technical knowledge, I was honestly scared that I wouldn’t be able to build the solar panels on my own. I had no unique technical background or anything of that sort. In actuality, I work in blue collar work in construction and it’s really far from anything technical.

You may be able to understand my predicament. I wanted to know for sure that I can assemble my own solar panels without any troubles. Of course the websites will tell me that anyone could do it because they want to sell it to me, but I was a bit skeptical. It was to my benefit if I got a review from someone who didn’t work in that company.

I went onto forums and see what people had to say about how cumbersome it was to make a solar panel. My peers gave me their experiences and also warned me on a couple of things I should look out for and it honestly didn’t look too hard.

I wanted to get rid of this worry and know that I could do it. I got in an in-depth conversation with some forum people to find out that some actually tried these Do It Yourself energy projects.

I would highly recommend Green DIY Energy.

Different Types of 12v Solar Chargers

For individuals who are interested in saving money and reducing pollution and reliance on foreign oil, a 12 volt solar charger is a surprisingly easy-to-build and versatile option. Read on to learn more about different kinds of solar battery chargers, as well as how to put one together for yourself.

The simplest kind of battery charger works by simply supplying a battery with electricity of the correct voltage. The battery is connected to the power supply, and disconnected after it’s completely charged. If you want to charge a 12 volt battery, you can put it into a 15-18 volt power supply. However, this type of battery charger poses the risk of overcharging.

When overcharged, a battery’s life is likely to decrease. Overcharging a 12 volt battery too often can damage it to the point that it will become unable to maintain a charge. However, there is a device called a charge controller that will ensure that the correct voltage is used and keep the battery from being overcharged. A charge controller is just as necessary when you’re using a 12 volt solar charger, as it will allow you to charge a battery throughout the day without the danger of overcharging.

The most common type of charge controller for 12 volt batteries is a Pulse Width Modulation (PWM) charge controller. With a PWM charge controller, a switch is turned on and off repeatedly in relation to the flow of the electricity. At first, the switch stays “on” more. The switch gradually spends less time in the “on” position as power is transferred to the battery, and once it’s fully charged, the switch remains off. In a PWM charge controller, a microprocessor chip usually performs the task of monitoring and controlling the charging process. There is no danger of overcharging with this type of charge controller, even if you leave it connected to a battery indefinitely. This is known as “trickle charging,” and it is a good strategy when you have a battery that you might not necessarily use constantly, but would like it to be charged when you do need to use it. If you’re using a 12 volt solar charger, it’s good to have this type of feature. This is a convenient way of keeping the 12 volt battery for, for example, a boat or an RV charged.

With these basic components, you can make a 12 volt solar charger. The source of the power itself is the only thing that makes a 12 volt solar charger different. Of course, a solar panel is the source of the power for a solar battery charger. Many people are now building their own DIY solar panels. Read more at DIY Solar Panel.

Most of the solar panels used on houses contain 1/2 volt and 3-4 amp solar cells. Since a 12 volt battery charger requires about 15-18 volts of electricity to use, it’s necessary to connect several of these cells to generate sufficient power. Currently, there are small solar panels of numerous different voltages on the market. It’s necessary to match the voltage of the solar panel to your charge controller. The correct voltage is shown on the voltage rating, which is shown on every charge controller. Generally, it’s best to use a solar panel of 15-18 volts if you can’t use a charge controller. However, if you are using a charge controller, it’s necessary to use the appropriate voltage. One great guide to building your own 12 volt solar charger is GreenDIYEnergy. If you’re interested, visit GreenDIYEnergy.

The connector used by the charge controller will determine the best way of wiring it to the solar panel. Generally, it’s safe to solder the same type of connector onto the solar panel that’s on your charge controller. Use the kind of connector that’s on the battery if you can’t use a charge controller. With respect to clamps, the spring loaded type are a good choice for larger 12 volt batteries. For people who would prefer not to solder, you aren’t absolutely required to solder (although this type of soldering is very simple); it is possible to just twist the wires together and apply electrical tape. You’ll just need a basic soldering iron and solder, which you can find at lots of places including Radio Shack. All you have to do is twist the wires on either side together, applly the soldering iron to the wires, and touch the solder to the wires until it melts. There are only a couple of things to be careful of: don’t burn yourself on the wires, and be sure to heat the wires directly with the soldering iron, not the solder itself. Another guide to building your own 12v solar charger that I recommend is Homemade Energy. If you’re interested, check out Homemade Energy.

It’s really that simple! Building a 12 volt solar charger is a simple procedure too. The first thing you’ll need is a 12 volt battery. Paying attention to the appropriate voltage, you’ll also need a charge controller. The solar panel, which you can build yourself or buy, should also output the same voltage. The last step is to make all the connections – connect the solar panel to the charge controller, and the charge controller to the battery. Now, you have free power, permanently! What’s more, you get some significant residual benefits: you save money, because you don’t have to pay for the energy you need to charge the battery; you reduce emissions, as electricity generated by solar panels doesn’t pollute like energy from oil or coal-fired plants does; and you help the country by helping end dependence on foreign oil.

Types of 12 Volt Solar Chargers

Many people are aware that solar chargers are a good alternative to non-renewable sources of energy, but not everyone is familiar with how simple they are to build. The purpose of this piece is to outline important information about different kinds of solar battery chargers, as well as how to build your own.

In the simplest terms, a battery charger may be nothing more than a power supply that sends electricity of a given voltage to a battery. The battery placed in the charger, and disconnected once it’s completely charged. A 12 volt battery may be charged in a 15-18 volt charger. However, this type of battery charger poses the risk of overcharging.

An overcharged battery’s life is likely to decrease. If you seriously or repeatedly overcharge a 12 volt battery, the battery can be damaged to the point that it will no longer hold a charge. However, you can use a charge controller, which will ensure that the necessary voltage is used and keep the battery from being overcharged. If you’re using a 12 volt solar charger, you’ll most likely want to be able to leave it connected all day while the sun is shining, in which case a charge controller is a must.

The most widely used kind of charge controller for 12 volt batteries is a Pulse Width Modulation (PWM) charge controller. A PWM charge controller works by, in a sense, switching on and off very quickly. Initially, the switch stays “on” more. The switch gradually spends less time in an activated state as power is transferred to the battery, and once it’s fully charged, the switch remains off. The charging process is handled by a microprocessor chip. In other words, you can leave this type of charge controller plugged into a battery all day long if you like, since it will only send electricity to the battery when needed, without any danger of overcharging. Topping up a battery in this way is called “trickle charging,” and it will allow you to ensure that a battery is completely charged for whenever you happen to need it. If you’re using a 12 volt solar charger, it’s good to have a feature like this. 12 volt batteries for boats and RVs are often charged in this way, for example.

These are the basic components that make up a 12 volt solar charger. The source of the electricity is the only thing that differentiates a 12 volt solar charger from a standard 12 volt battery charger. With a solar charger, of course, the power comes from a solar panel rather than from the wall.  Building your own DIY solar panel for use in a 12 volt solar charger is becoming more common.  Read more at DIY Solar Panel.

For the common solar panels used on homes, the solar cells are generally around half a volt and three to four amps. Several of these cells have to be connected in order to generate the 15-18 volts necessary for a 12 volt battery charger. It’s possible to get small solar panels in quite a few different voltages. It’s necessary to match the voltage of the solar panel to your charge controller. The voltage rating on the charge controller tells you what voltage you’ll need. A solar panel of 15-18 volts is usually a fairly safe bet if you can’t use a charge controller for whatever reason. However, if you are using a charge controller, it’s necessary to use the appropriate voltage.  You can build your own 12 volt solar charger with the help of GreenDIYEnergy.  To read my article about it, visit GreenDIYEnergy Review.

Depending on the controller, the method for wiring it to the solar panel can differ. Whatever type of connector is used on your charge controller, just solder one onto the solar panel. Use the type of connector that’s on the battery if you aren’t using a charge controller. Spring loaded clamps are a good choice with most larger 12 volt batteries. You do have the choice of applying electrical tape instead of soldering, but soldering is a more permanent solution, and, in this case, it’s a very simple procedure. You won’t have to use any special tools other than a decent soldering iron and solder, which you can find easily at places like Radio Shack. All you have to do is twist the wires on either side together, use the soldering iron on the wires, and touch the solder to the wires until it melts. There are just two things to keep in mind: don’t burn yourself on the wires, and be sure to heat the wires directly with the soldering iron, not the solder itself.  Homemade Energy is another great guide to building your own 12 volt solar charger.  To read more, check out Homemade Energy.

It’s really as easy as that! Building a 12 volt solar charger is pretty easy as well. A 12 volt battery is the first component. Then, you’ll need a charge controller with the same voltage as the battery. The solar panel, which you can build yourself or buy, should also output the same voltage. The last step is to make all the connections – connect the solar panel to the charge controller, and the charge controller to the battery. After you’ve done this, you’ll have permanent, free power! What’s more, you get some significant residual benefits: you save money, because you don’t have to pay for the energy you’re using to charge the battery; you reduce pollution, as energy generated by solar panels doesn’t pollute like energy from oil or coal-fired plants does; and you help the country by helping end dependence on foreign oil.